Stronger vaping liquid will be available soon

[MrWhite]

I know my current vaping liquid is very mild. A lot of users report needing 30+ puffs to feel the effects. I guess it's a product for people on a budget.

However, all of that is going to change very soon. I finally made improvements. It was actually a very long journey, but I finally figured it out.
Now most users will only need 2-3 puffs to feel the effects (it's pure wax). This huge improvement does change the price. The price will be 2000 ksh for 1 ml wax, which still makes it one of the more affordable THC vaping liquids available in Kenya especially since it will now be very potent and last much longer. It will actually last just as long as the budget 10 ml version because you only need 3 puffs instead of 30+ puffs.

Product should be available in 5-7 days, I need to do more testing first.

The old product will remain available for people who are on a budget, but still want to vape THC. It will be labelled as low potency and the new version will be labelled as strong potency.
Please note you will need a wax pen to vape the wax. You can't vape wax in a normal refillable vape pen.

 

[MrWhite]

Instructions on how to use the wax. These are instructions for the Yucon wax pen. This is literally the only wax pen I found available for sale in Nairobi. Price is high (9000 ksh). If you already own a wax pen or know how to source one for a lower price, then that's fine.

To load a single drop or small piece of THC wax into a Yocan wax pen using a toothpick, follow these steps:
## 1. Prepare Your Pen

* Turn it off: Press the power button 5 times quickly to prevent accidental heating.
* Expose the coil: Unscrew the mouthpiece and the magnetic or threaded coil cap.

## 2. Collect the Wax

* Gather the drop: Use the tip of a clean toothpick to scoop a tiny, rice-sized drop of wax.
* Manage the stickiness: If the wax is too runny, place it in the fridge for 5 minutes first. If it is too hard, gently warm the toothpick tip with your fingers.

## 3. Place the Wax

* Target the center: Gently lower the toothpick into the chamber.
* Avoid the walls: Center the wax directly onto or just above the heating coils. Do not scrape it against the fragile sides of the chamber.
* Release the drop: If the wax sticks to the toothpick, roll the toothpick against the coil gently, or pulse the pen's power button for a split second to melt the wax off the wood.

## 4. Reassemble and Hit

* Put it together: Screw the coil cap and mouthpiece back on.
* Keep it upright: Keep the pen completely vertical so the melted wax does not leak out of the air holes.

The standard Dual Quartz Coils (QDC) inside your Yocan Evolve Plus heat up almost instantly. Because quartz does not retain heat the way ceramic does, it cools down the moment you release the button. This gives you exact control over your single drop of wax.
Use this specific timing method to get the perfect hit without burning your wax:
## The 3-Step Inhalation Timing

* Step 1: The Melt-Pulse
* Press the power button for just 1 second before putting the pen to your lips.
* This liquefies the wax so it melts completely into the quartz rods.
* Step 2: The "Feathering" Draw
* Start inhaling slowly and steadily.
* Hold the button for 2 to 3 seconds.
* Release the button for 1 second (keep inhaling).
* Hold the button again for 2 seconds.
* Step 3: The Cool Down
* Let go of the button completely for the final 2 seconds of your breath.
* Keep inhaling to pull cool air through the chamber. This clears out the remaining vapor and cools down the metal wires.

## Crucial Tips for Dual Quartz Coils

* Stop when flavor drops: Quartz coils will taste burnt the second they run dry. When the vapor flavors change from tasty to bitter, your drop is completely gone.
* Keep it vertical: The melted wax sits at the very bottom of the cup. Keep the pen completely upright during and right after your hit so the oil doesn't leak into the air holes.
* Clean dry burns: If you see black residue on the wires, dip a cotton swab in 90%+ isopropyl alcohol, wipe the cold coil, and let it dry completely before your next session.